A cooling and extinguishing lance designed to cool and extinguish fires in traction batteries in electric and hybrid cars.

It is an indispensable tool for rescue workers whose goal is to effectively cool and then extinguish fires, and prevent them from spreading to the entire vehicle.

Working with this tool provides the operator with complete safety against exposure to direct contact with high temperatures, fire and smoke.

The 1200 mm long lance has 9 double heads, which gives 18 nozzles effectively covering the entire floor of the vehicle with a cooling water mist.
For the safety of the operator, the extension allows the cooling and extinguishing lance to be inserted under the floor of the vehicle from a safe distance.
For the safety of the rescuer, there is an extension that allows the cooling and extinguishing lance to be inserted under the vehicle floor from a safe distance.
The minimum height ensures that this lance can be used even after the tyres have been shot out in low-slung cars, as it is only 6 cm high.
The optimum working capacity is approx. 50 l/min; the water jet from each nozzle is cone-shaped.
The optimum working capacity is approx. 50 l/min; the water jet from each nozzle is cone-shaped. The stainless steel from which the lance is made ensures that it is resistant to heat radiation, but also
to all kinds of mechanical damage, making it a durable and effective deviceeven in the most difficult conditions.
Thanks to the use of acid-resistant steel throughout the device, which is resistant to erosion, oxidation
and corrosion, the tool will remain in perfect condition at all times.

The total weight is 7.9 kg, which is an additional advantage, as only one rescuer is needed to carry it.
The total length of the lance is 2400 mm and the working length is 1200 mm.
The recommended working pressure of 2 bar consumes only about 40 litres per minute of operation, which is optimalfor efficiency with significant water savings.
It is supplied with a W25 hose as standard, but with the SNM/52 supply tip fitted, we can use W 52 hoses or a quick attack hose, and with the use of a reduction, a W 25 hose.